This document is an owner's manual for Coast Spas Swim Spas, covering various models from 1302 (Bench) to 2100 VE. It provides comprehensive information on setup, operation, maintenance, and troubleshooting for these swim spas.
Function Description:
Coast Spas Swim Spas are self-contained units designed for both relaxation and exercise. They feature powerful jets for swimming against a current, hydrotherapy massage jets, and various control options for temperature, filtration, and lighting. The swim spas are equipped with advanced filtration systems, including Pleatco DualCore Filters, and can be optionally fitted with ozonators and EcoClean UV Sterilizers for enhanced water sanitation. Control panels, such as the Wellness Series (9-button) Performance Plus with Variable Speed Control Panel, allow users to manage all spa functions, including swim workouts, heating modes, and filter cycles. Connectivity options like the Balboa Wi-Fi Module and ControlMySpa™ system enable remote control and monitoring via smart devices.
Important Technical Specifications:
The manual provides specifications for different swim spa models, including:
- Water Capacity (L/US Gal): Ranges from 5320 L (1405 US Gal) for the 1302 Bench to 10487 L (2770 US Gal) for the 2100 VE.
- Dry Weight (lbs/kg): Ranges from 2200 lbs (998 kg) for the 1302 Bench to 4000 lbs (1815 kg) for the 2100 VE.
- Wet Weight (lbs/kg): Ranges from 13929 lbs (6315 kg) for the 1302 Bench to 27121 lbs (12302 kg) for the 2100 VE.
- Dimensions (cm/inches): Vary by model, e.g., 384 x 229 x 135 cm (151 x 90 x 53 inches) for the 1302 Bench and 630 x 229 x 161 cm (248 x 90 x 63.5 inches) for the 2100 VE.
- Electrical Requirements: All self-contained spas use 120VAC or 240VAC electrical spa packs. 120VAC requires an isolated 15 Amp circuit breaker, while 240VAC models require a 40, 50, or 60 Amp dedicated GFCI circuit breaker with proper wire size. Optional auxiliary heaters require a separate 30 AMP breaker service. Minimum 6AWG copper conductors are specified for connections.
- Water Chemistry Parameters: pH: 7.2-7.8; Chlorine: 1.0-3.0 ppm; Bromine: 2.0-5.0 ppm; Total Alkalinity: 100-120 ppm; Calcium Hardness: 150-250 ppm.
- Water Temperature: Maximum recommended for health is 38°C (100°F); for exercise, it should not exceed 32°C (90°F).
- EcoClean UV Sterilizer: UV lamps produce UV-C dose for microorganism eradication. UV Rays generated at 254 Nm. Lamp replacement every 13,000 operating hours. Quartz tube cleaning every 12-18 months.
- Balboa Ultrazone Ozonator: Produces ozone for sanitation.
Usage Features:
- Control Panel: The Wellness Series panel allows for intuitive control of pumps, jets, lighting, and heating. It features a main screen displaying time, water temperature, and system status.
- Priming Mode: Automatically activates upon power-up, allowing users to turn jets on/off to prime pumps.
- Swim & Swim Workout: Dedicated buttons for activating swim pumps and programming custom swim workouts with adjustable speeds and durations for warm-up, workout, and cool-down phases.
- Heating Modes: Standard, Energy Saving, and Vacation modes to optimize heating based on usage patterns. Special Temp mode allows temporary heating to 105°F or 106°F.
- Filter Cycles: Customizable filter cycles with adjustable start times, durations, and days for efficient water filtration.
- Panel Lock: Options to lock all buttons, temperature change, or menu access to prevent unintended changes.
- Water Diverters & Air Controls: Allow users to direct water flow to specific seats and introduce air into the jet stream for varied massage experiences.
- LED Lighting: Customizable mood lighting in the spa and jets.
- Balboa Bluetooth Audio: Connects to smart devices to play music through spa speakers, with controls for volume, track selection, balance, fade, and EQ presets.
- Wi-Fi Connectivity (Balboa Wi-Fi Module & ControlMySpa™): Enables remote control and monitoring of spa functions (temperature, heat mode, filter cycles, etc.) via a smartphone app. The ControlMySpa™ system includes a GATEWAY ULTRA module, mobile app (iOS/Android), and website access.
Maintenance Features:
- Water Quality Maintenance: Emphasizes regular chemical usage and maintaining water chemistry within specified parameters (pH, chlorine/bromine, total alkalinity, calcium hardness) to prevent damage and ensure safe water.
- Filter Maintenance: Requires replacing filter cartridges every six months and rinsing them weekly with a hose. Monthly cleaning with a cartridge filter cleaner is recommended. The Pleatco DualCore filter's inner core can be removed for cleaning.
- Water Replacement: Recommended every 3-6 months, depending on usage.
- Headrest/Pillow Care: Removable pillows should be cleaned with a soft cloth and mild soap, then wiped with a conditioner. They should be removed if water chemistry is unbalanced.
- Swim Spa Interior Cleaning: Fiberglass reinforced acrylic shell should be cleaned with a soft damp cloth or sponge using a low-sudsing household soap and rinsed thoroughly.
- Cover Maintenance: Regular cleaning with a soft brush and mild soap, followed by vinyl conditioner application, is recommended.
- Diverter and Jet Maintenance: Instructions for disassembling and cleaning diverter caps and jet bodies to remove dust and debris, ensuring optimal function.
- Draining & Winterizing: Detailed instructions for draining the spa using the floor drain and optional Water-Vac system. Includes steps for preparing the spa for cold weather, such as disconnecting pump unions and using a shop vacuum to remove excess water.
- Troubleshooting Guide: Provides solutions for common issues related to water clarity (odor, cloudiness, algae), heat problems (not heating, too hot), lighting issues, pump problems (not working, noisy, running constantly), and hydrotherapy jet issues (no water flow).
- Coast Status Lighting Legends: Cabinet-mounted LED light indicates spa status (steady blue for operational, flashing blue for reminders, steady red for warnings/faults, flashing red for severe warnings/faults). Error codes are displayed on the control panel for specific issues.