Why is the water cloudy in my Coast Spas CURVE MIRAGE?
Cloudy water in your Coast Spas Hot Tub can stem from several issues. It may be due to poor filtration, which requires cleaning the filter cartridge. The pH, hardness or total alkalinity might be too high, needing adjustment. Alternatively, suspended particles could be the cause, suggesting the spa water needs to be drained and refilled.
How to get rid of chlorine odor in Coast Spas Hot Tub?
If you notice a chlorine odor in your Coast Spas Hot Tub, it could be due to high levels of chloramines or a low pH. To resolve this, shock the spa with sanitizer and adjust the pH level.
What to do if I have eye irritation in Coast Spas CURVE MIRAGE?
Eye irritation in your Coast Spas Hot Tub can occur if the pH or sanitizer levels are too low. Addressing this involves shocking the spa with sanitizer, adjusting the pH, and ensuring the sanitizer level is correct.
How to eliminate water odor in Coast Spas Hot Tub?
If you're experiencing a water odor in your Coast Spas Hot Tub, it could be due to improper sanitization, excessive organics in the water, or a pH that's too low. To fix this, add sanitizer, shock the spa with sanitizer, and adjust the pH accordingly.
How to prevent scale in Coast Spas CURVE MIRAGE Hot Tub?
Scale in your Coast Spas Hot Tub is often caused by high total alkalinity, high pH, or high calcium content in the water. To combat scale, adjust the total alkalinity and pH, and use a stain and scale product.
What to do if there are stains in my Coast Spas CURVE MIRAGE?
Stains in your Coast Spas Hot Tub can be caused by total alkalinity or pH that is too low, or high metal content in the water. Rectify this by adjusting the alkalinity and pH, and using a stain and scale product.
How to prevent algae growth in Coast Spas Hot Tub?
Algae growth in your Coast Spas Hot Tub may be due to a high pH or low sanitizer levels. To address this, adjust the pH and shock the spa with sanitizer. Also, ensure the sanitizer level is properly adjusted.
Why does my Coast Spas CURVE MIRAGE Hot Tub have a musty odor?
A musty odor in your Coast Spas Hot Tub may be due to bacteria or algae growth. To resolve this, shock the spa with sanitizer. It may also be resolved by draining and refilling the spa water.
A congratulatory message and introduction for new spa owners.
Critical warnings about spa use, temperature, and electrical safety.
Detailed electrical specifications and safety for spa installation.
Common problems and solutions for the spa's core systems.
Troubleshooting steps for heating, lighting, and plumbing problems.
Step-by-step guide for safely draining and winterizing the spa.
How to navigate the Elite Series control panel and use basic functions.
Adjusting temperature ranges, heat modes, and other panel settings.
Overview of the Luxury Series control panel interface and features.
How to manage spa settings, lock the panel, and ensure security.
Explanation of the CMS code and its purpose for spa registration.
General| Dimensions | 80" x 91" x 35" |
|---|---|
| Number of Jets | 37 |
| Water Capacity | 286 US gallons |
| Voltage | 240V |
| Amperage | 50A |
| Heater | 5.5 kW |
| Cabinet Material | Synthetic |
| Pump Motors | 2 |
| Shell Material | Acrylic |
To Next Page
