Why is the water cloudy in my Coast Spas Hot Tub?
Cloudy water in your Coast Spas Hot Tub can stem from several issues. It may be due to poor filtration, which requires cleaning the filter cartridge. The pH, hardness or total alkalinity might be too high, needing adjustment. Alternatively, suspended particles could be the cause, suggesting the spa water needs to be drained and refilled.
How to get rid of chlorine odor in Coast Spas Hot Tub?
If you notice a chlorine odor in your Coast Spas Hot Tub, it could be due to high levels of chloramines or a low pH. To resolve this, shock the spa with sanitizer and adjust the pH level.
What to do if I have eye irritation in Coast Spas CURVE APEX Hot Tub?
Eye irritation in your Coast Spas Hot Tub can occur if the pH or sanitizer levels are too low. Addressing this involves shocking the spa with sanitizer, adjusting the pH, and ensuring the sanitizer level is correct.
How to eliminate water odor in Coast Spas CURVE APEX?
If you're experiencing a water odor in your Coast Spas Hot Tub, it could be due to improper sanitization, excessive organics in the water, or a pH that's too low. To fix this, add sanitizer, shock the spa with sanitizer, and adjust the pH accordingly.
How to prevent scale in Coast Spas Hot Tub?
Scale in your Coast Spas Hot Tub is often caused by high total alkalinity, high pH, or high calcium content in the water. To combat scale, adjust the total alkalinity and pH, and use a stain and scale product.
What to do if there are stains in my Coast Spas CURVE APEX?
Stains in your Coast Spas Hot Tub can be caused by total alkalinity or pH that is too low, or high metal content in the water. Rectify this by adjusting the alkalinity and pH, and using a stain and scale product.
How to prevent algae growth in Coast Spas Hot Tub?
Algae growth in your Coast Spas Hot Tub may be due to a high pH or low sanitizer levels. To address this, adjust the pH and shock the spa with sanitizer. Also, ensure the sanitizer level is properly adjusted.
Why does my Coast Spas CURVE APEX Hot Tub have a musty odor?
A musty odor in your Coast Spas Hot Tub may be due to bacteria or algae growth. To resolve this, shock the spa with sanitizer. It may also be resolved by draining and refilling the spa water.
Describes water chemistry parameters for optimal spa function.
Details electrical needs and spa location.
Covers critical safety information.
Defines various spa parts and their functions.
Discusses ideal location and setup considerations.
Lists and identifies numbered parts of the spa layout.
Highlights technological advancements, comforts, and durability.
Covers preparation, filling, and powering up.
Comprehensive guide to spa upkeep.
Instructions for maintaining spa cabinets and covers.
Details wiring and optional heater installation.
Focuses on filter upkeep and top-load filter procedures.
Covers TDS, pH, bromide, and operational modes.
Instructions for cleaning specific jet types.
Addresses common operational problems and solutions.
Essential steps for spa storage and seasonal changes.
Covers menu navigation, modes, temperature, and panel locking.
Details filtration, system codes, and diagnostic features.
Covers menu, priming, jets, time, settings, and panel locking.
Details jet configurations for various spa models.
Steps to link the module to the home Wi-Fi.
Details system overview and access methods.
Steps for installing and connecting the home network hardware.
Explains CMS code and its role.
Step-by-step guide to setting up the account.
Covers panel layout, general operation, radio, USB, and Bluetooth.
Covers power, remote, and USB media functions.
Details Bluetooth/FM playback and ozone sanitation.
Covers cleaning, TDS, chemistry, and modes for the system.
General| Voltage | 240V |
|---|---|
| Heater | 4.0 kW |
| Seating Capacity | 6-7 |
| Pump | 2 x 5.0 HP |
| Filtration | Yes |
| Shell Material | Acrylic |
| Weight | 850 lbs Dry / 4350 lbs Filled |
To Next Page
