Coaster 300026 - User Manual

Need help?

Do you have a question about the Coaster 300026 and is the answer not in the manual?

Summary

Assembly Instructions

Pre-Assembly Guide

Provides essential assembly tips, safety warnings, and estimated assembly time.

Component Identification

Details all furniture parts and hardware needed for the assembly process.

Assembly Steps

Step 1 & 2

Initial assembly stages involving frame construction and attaching front/back rails.

Steps 3, 4 & 5

Continues assembly with trundle bed frame construction and caster attachment.

Steps 6 & 7

Final assembly stages for securing trundle bed components and slats.

Step 8: Complete

Indicates the final completion of the trundle bed assembly.

This document provides assembly instructions and product information for the Coaster Fine Furniture Trundle Bed, model number 300026 (B1&B2).

Function Description

The Coaster Trundle Bed is a piece of fine furniture designed for home use, featuring a main bed frame and an integrated trundle bed that can be pulled out from underneath. It is intended to provide a space-saving sleeping solution, ideal for accommodating guests or for use in children's rooms. The trundle bed design allows for an additional sleeping surface to be stored discreetly when not in use, maximizing floor space.

Important Technical Specifications

Model Number: 300026 (B1&B2) Product Type: Trundle Bed Assembly Time: Approximately 30 minutes

Dimensions (Approximate, with ±5% tolerance):

Overall Length: 82.28 inches
Overall Width: 44.56 inches
Overall Height: 49.40 inches
Upper Inner Size (Mattress Area): 40.35 inches x 78.35 inches
Lower Inner Size (Trundle Mattress Area): 40.35 inches x 74.41 inches
Height from floor to top of lower bed frame: Approximately 13.15 inches
Height from floor to top of upper bed frame: Approximately 14.25 inches (to the bottom of the mattress support)
Clearance under upper bed frame (for trundle): Approximately 7.08 inches
Trundle front panel height: Approximately 1.77 inches (from the bottom edge of the trundle frame)
Width of bed posts/frame elements: Approximately 4.52 inches

Parts List (B1 - BOX1):

AN (FRONT RAIL): 1 PC
BN (BACK FRAME): 1 PC
CN (ROLL SLAT): 2 SETS (13 PCS per set)
DN (TRUNDLE FRONT RAIL): 1 PC
EN (TRUNDLE BACK RAIL): 1 PC
FN (TRUNDLE SIDE PANEL): 2 PCS

Parts List (B2 - BOX2):

GN (FINIAL): 4 PCS
HN (LEFT LEG FRAME): 1 PC
IN (RIGHT LEG FRAME): 1 PC
JN (CASTER): 4 PCS

Hardware List (Z-B2(BOX2) - Hardware Pack):

LONG BOLT (1/4 x 100 x 13mm - RBW): 4 PCS (Item 1)
BARREL NUT (1/4 x 13mm - RBW): 4 PCS (Item 2)
SHORT BOLT (1/4 x 32 x 13mm - RBW): 8 PCS (Item 3)
LONG FLAT HEAD SCREW (4 x 30mm - RBW): 12 PCS (Item 4)
SHORT FLAT HEAD SCREW (3 x 20mm - RBW): 16 PCS (Item 5)
WOOD PLUG (Φ14.5 x 9mm-WHT): 4 PCS (Item 6)
ALLEN WRENCH (4MM - RBW): 1 PC (Item 7)

Revision History:

Revision 0: 11/14/2006
Revision 1: 09/05/2012
Revision 2: 03/21/2018
Revision 3: 06/03/2019

Usage Features

The trundle bed is designed for ease of use and versatility. The main bed provides a standard sleeping surface, while the pull-out trundle offers an additional bed without occupying permanent floor space. This makes it suitable for rooms where space is at a premium or for situations requiring flexible sleeping arrangements. The casters on the trundle unit allow for smooth and easy movement when pulling it out or pushing it back under the main bed. The design, featuring vertical slats on the headboard, footboard, and trundle front, gives it a classic and clean aesthetic, fitting into various room decors.

Maintenance Features

The assembly instructions emphasize proper handling and care to ensure the longevity of the furniture.

Assembly: Users are advised to remove hardware from the box and sort by size, verify all hardware and parts are present before starting assembly, and follow the numbered steps in sequence for fast and easy assembly.
Tools Required: A Phillips head screwdriver is required for assembly, but it is not provided by the manufacturer.
Damage/Defects: In case of broken or defective parts, users are warned not to attempt repairs or modifications and to contact the store immediately.
Intended Use: The product is strictly for home use and is not intended for commercial establishments. This implies that it is designed to withstand typical household wear and tear, and commercial use might void warranties or lead to premature wear.
Cleaning: While not explicitly detailed in the provided pages, "Fine Furniture for every stage of life" suggests that standard furniture care practices, such as regular dusting and occasional cleaning with appropriate furniture cleaners, would be suitable for maintaining its appearance. The white finish (implied by the wood plug color "WHT") would likely require gentle cleaning to prevent discoloration or damage.