Coaster 460182 - Assembly Tips and Warnings; Assembly Tips; Assembly Warnings; Parts Identification

ASSEMBLY INSTRUCTIONS
ITEM: 460182 (B1-B3)
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
ASSEMBLY TIPS:
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 30 MINUTES
PARTS IDENTIFICATION
B1 ( BOX 1)
A
B
C
D
LEFT UPPER
BED END
LEFT LOWER
BED END
RIGHT LOWER
BED END
RIGHT UPPER
BED END
1PC
1PC
1PC
1PC
B2 ( BOX 2)
1PC
1PC
4PCS
2PCS
4PCS
B3 ( BOX 3)
UPPER BUNK
ROLL SLAT
(14PCS)
LOWER BUNK
ROLL SLAT
(14PCS)
1SET
I
1SET
J
PAGE 2 OF 9
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE
.COM
LF1
E
F
G
H
KF1
RIGHT LADDER
STILE
FRONT LOWER
SIDE RAIL
LEFT LADDER
STILE
FRONT UPPER
GUARDRAIL
BACK UPPER
GUARDRAIL
BACK LOWER
SIDE RAIL
1PC
1PC
1PC
1PC
1PC
MF1
LADDER STEP
N
O
P
Q
R
DRAWER BACK
PANEL
DRAWER BOTTOM
PANEL
DRAWER SIDE
PANEL
DRAWER FRONT
PANEL
TRESTLE BAR
2PCS
2PCS
S
BED SLAT SUPPORT
WITH LEVELER
4PCS