Coaster 460263 - Assembly Preparation and Safety; Assembly Tips; Important Safety Warnings; Parts Identification

ITEM:
460263 (B1-B4)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 2 OF 10
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
ASSEMBLY TIME 30 MINUTES
PARTS IDENTIFICATION
AF
BF
DF
1PC
LOWER RIGHT
BED END
LOWER
BOTTOM RAIL
2 HOLES
TRESTLE BAR
UPPER FRONT
BED RAIL
BACK GUARDRAIL
FRONT GUARDRAIL
4PCS
ROLL SLAT
1SET
LOWER LEFT
BED END
UPPER BACK
BED RAIL
1PC
B2 (BOX 2)
B3 (BOX 3)
EF
FF
GF
HF
IF
JF
1PC
2PCS
2PCS
2PCS
1PC
1PC
3PCS
KF
MF
B1 (BOX 1)
CF
UPPER BED
END
3 HOLES
TRESTLE BAR
SHORT SLAT
6PCS
LEFT LEG
TABLE TOP
LADDER STEP
5PCS
RIGHT LADDER
STILE
RIGHT LEG
LEFT LADDER
STILE
1PC
1PC
1PC
1PC
1PC
2PCS
2PCS
QF
LF
NF
OF
PF
RF
SF
TF
(14PCS)