Coaster 460263 - Hardware Identification; Hardware Identification by Number

ITEM:
460263 (B1-B4)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 460263 (B2)
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
PAGE 3 OF 10
LEVELER
(6 x 30mm - BLK)
24PCS
LONG BOLT &
BARREL NUT
(M6 x 110 x 15mm - BLK)
CYCLINDER NUT
(M6 x 15mm - BLK)
METAL DOWEL
(10 x 125mm - BLK)
ALLEN WRENCH
(4 x 80MM - BLK)
U-BRACKET
(95 x 54 x 17 x 2mm - BLK)
SHORT BOLT
(M6 x 30 x 13mm - BLK)
LONG FLAT HEAD
SCREW
(4 x 30mm - BLK)
WOOD DOWEL
(10 x 40mm )
SHORT FLAT HEAD
SCREW
(3.5 x 15mm - BLK)
MEDIUM BOLT &
BARREL NUT
(M6 x 85 x 15mm - BLK)
LONG BOLT
(M6 x 40 x 13mm - BLK)
1
18PCS
SHORT BOLT &
BARREL NUT
(M6 x 60 x 15mm - BLK)
4PCS
10PCS
10PCS
6PCS
20PCS
2
3
4
5
6
7
8
9
10
11
12
13
4PCS
32PCS
2PCS
15PCS
5PCS
2PCS