Coaster 600174 - Step 1: Frame Assembly; Step 2: Attach Leg Frames to Seat; Step 3: Attach Chair Back

ITEM :
ASSEMBLY INSTRUCTIONS
STEP 1 STEP 2
STEP 3
www.coastercompany.com
PAGE 3 OF 4
600174
Align and fasten front and back stretchers to left and
right leg frame using barrel nut, long bolt, lock washer
and small flat washer and tighten with Allen wrench.
Insert wood plug into the open holes of leg frame.
Place wooden seat upside down on soft surface.
Align and fasten left and right leg frame to
wooden seat using short bolt , lock washer and
small flat washer and tighten with Allen wrench.
Align and fasten chair back to wooden seat using short bolt, lock washer and small flat washer and tighten
with Allen wrench. Insert wood plug into the open holes of chair back brace.