EasyManua.ls Logo

Coaster CONNECT IT - User Manual

Coaster CONNECT IT
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Fine Furniture for every stage of life
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
PAGE 1 OF 14
CONNECT IT TV CONSOLE
Question and Answer IconNeed help?

Do you have a question about the Coaster CONNECT IT and is the answer not in the manual?

Summary

Assembly Information and Parts Identification

Assembly Tips and Safety Warnings

Provides essential guidance, tips, and crucial safety information for users during assembly.

Parts Identification (A-P)

Lists and illustrates the primary structural components required for assembling the TV console.

Hardware Identification

Hardware Identification (1-16)

Details fasteners, connectors, cam locks, dowels, and other hardware used in assembly.

Additional Hardware (17-21)

Identifies remaining hardware such as feet, pins, stickers, and the included screwdriver.

Step 1: Base Panel Assembly

Attaching Feet and Side Panels

Details the initial assembly steps involving attaching feet and connecting side panels to base components.

Step 2: Panel Connections

Connecting Divider Panels

Illustrates how to connect divider panels (C, D) and attach side panels (E) using dowels and screws.

Step 3: Bottom and Brace Assembly

Assembling Bottom and Cross Braces

Details attaching the bottom panel (G) and cross braces (F) using dowels and screws.

Step 5: Attaching Back Panels and Shelves

Connecting Back Panels and Shelves

Illustrates attaching back panels (O, P) and shelves (L) to the main structure.

Step 6 & 7: Drawer Structure Assembly

Assembling Drawer Support Structure

Details attaching back panels (N) and base supports (M) for the drawer sections.

Step 8 & 9: Completing Main Frame

Securing Back Boards

Illustrates attaching back boards (P, O) to reinforce the main cabinet structure.

Step 10 & 11: Attaching Top and Hardware

Attaching Top Panel and Accessories

Details attaching the top panel (A, B) and power outlet (13) using screws and connectors.

Step 12 & 13: Door and Drawer Hardware

Installing Hinges and Drawer Slides

Illustrates attaching hinges (14) and drawer slides (10, 12) to the main unit and door (AA).

Step 14 & 15: Shelf Installation and Drawer Sides

Installing Shelves and Drawer Sides

Details fitting shelves (L) and assembling drawer sides (V, W) with bottom panels (Y).

Step 16 & 17: Drawer Assembly and Door Attachment

Completing Drawer Assembly and Doors

Illustrates assembling drawer fronts (Q, R, S) and attaching the door (AA) with hinges.

Step 18 & 19: Final Assembly and Completion

Final Component Placement

Details inserting the top glass (K) and completing the final assembly of the TV console.

Product Dimensions

Overall and Internal Dimensions

Provides detailed measurements for the entire unit and its internal compartments.

Overview

This document provides assembly instructions for the CONNECT IT TV CONSOLE by Coaster Fine Furniture, designed for home use and not intended for commercial establishments. The console is a multi-functional furniture piece designed to support a television and provide storage.

Function Description:

The CONNECT IT TV CONSOLE serves as a central entertainment unit, offering a stable platform for a television up to 65 inches in size. It incorporates various storage solutions including open shelves, enclosed compartments with doors, and multiple drawers, making it suitable for organizing media devices, accessories, and other household items. The design emphasizes both aesthetics and practicality, aiming to provide "Fine Furniture for every stage of life."

Important Technical Specifications:

  • Maximum TV Size: 65 inches
  • Overall Dimensions:
    • Length: 1520mm (59.75 inches)
    • Depth: 450mm (17.5 inches)
    • Height: 600mm (23.5 inches)
  • Internal Compartment Dimensions (approximate, based on diagrams):
    • Top Panels (Large and Small): These form the primary surface for the TV and other items.
    • Side Panels (Left and Right): Provide structural integrity.
    • Divider Panels (Upper and Lower): Create distinct sections within the console.
    • Bottom Panel: Forms the base of the main structure.
    • Back Panels/Boards: Enclose the rear of the console, some featuring cutouts for wire management.
    • Adjustable Shelves: Three adjustable shelves (L) are included, allowing for flexible storage configurations.
    • Drawers: The console features three drawers: a left drawer, a middle drawer, and a right drawer.
      • Drawer Front Panels (Q, R, S)
      • Drawer Back Panels (T, U)
      • Drawer Side Panels (V, W): Left drawer side panels (V) are 3 pieces, right drawer side panels (W) are 3 pieces.
      • Drawer Support (X): 3 pieces.
      • Drawer Bottom Panel (Y): 3 pieces.
      • Drawer Rails (16): 3 sets (CL, CR, DL, DR) with a length of 250mm.
      • Internal Drawer Dimensions (approximate, based on page 14):
  • Width: 254mm (10 inches)
  • Depth: 421mm (16.5 inches)
  • Height: 80mm (3 inches)
  • Front Panel Height: 93mm (3.5 inches)
  • Back Panel Height: 98mm (3.75 inches)
  • Side Panel Height: 100mm (3.75 inches)
  • Bottom Panel Height from ground: 51mm (2 inches) * Doors (AA): One door is included, likely for a central enclosed compartment. * Cross Brace (F): Two pieces for structural reinforcement.
  • Hardware Components:
    • Fasteners:
      • SCREW Ø4x15mm SR (9): 18 pieces
      • SCREW Ø3x10mm SR (6): 30 pieces
      • SCREW Ø4.5x42mm SR (7): 4 pieces
      • SCREW Ø4.2x35mm SR (8): 12 pieces
      • BOLT Ø4x23mm SR (12): 11 pieces
      • CAM LOCK Ø15x12mm SR (4): 20 pieces
      • CAM BOLT Ø7x35.5mm SR (5): 20 pieces
    • Dowel Pins:
      • LARGE WOODEN DOWEL Ø8x30mm (2): 58 pieces
      • SMALL WOODEN DOWEL Ø6x25mm (3): 12 pieces
    • Handles:
      • HANDLE L=120mm (10): 1 piece
      • HANDLE L=400mm (11): 3 pieces
    • Specialized Hardware:
      • GLUE 40g (1): 1 piece (for wooden dowels)
      • POWER OUTLET (13): 1 piece (integrated power solution)
      • HINGE (14): 4 pieces (for the door)
      • WIRE COVER CAP Ø60mm (15): 3 pieces (for cable management)
      • PLASTIC FEET Ø15mm (17): 6 pieces
      • RUBBER Ø52mm (18): 1 piece
      • STICKER Ø20mm (20): 4 pieces
      • PIN Ø4.9x8mm SR (21): 12 pieces
  • Assembly Time: Approximately 90 minutes.
  • Tools Required: Phillips head screwdriver (not provided).
  • Dimension Tolerance: ±5%

Usage Features:

  • Integrated Power Outlet: The console includes a power outlet (13), suggesting a convenient solution for powering media devices directly from the unit, reducing cable clutter.
  • Wire Management: Wire cover caps (15) are provided, indicating dedicated channels or openings for routing cables, contributing to a neat and organized appearance.
  • Adjustable Shelving: The presence of adjustable shelves (L) allows users to customize the internal storage space to accommodate various sizes of electronic components, books, or decorative items.
  • Multiple Storage Types: A combination of open shelves, drawers, and a door-enclosed compartment offers versatile storage options for different needs, from displaying items to concealing clutter.
  • Drawer System: The console features three drawers with rails (16) for smooth operation, providing enclosed storage for smaller items.
  • Stability: The inclusion of plastic feet (17) and a rubber component (18) suggests attention to stability and floor protection.

Maintenance Features:

  • Durable Construction: The assembly instructions emphasize applying glue to all wooden dowels "to ensure integrity of the structure," suggesting a design intended for long-term durability.
  • Easy Cleaning: While not explicitly stated, the smooth surfaces typical of furniture of this type are generally easy to wipe clean with a damp cloth.
  • Repair/Modification Warning: The manual explicitly warns against attempting to repair or modify broken or defective parts, advising users to contact the store immediately. This implies that specific replacement parts may be available through the retailer, or professional assistance might be required for repairs.
  • Home Use Only: The product is designated for "home use only," indicating that it is designed to withstand typical household wear and tear, but not the more rigorous demands of commercial environments.

The CONNECT IT TV CONSOLE is designed to be a practical and aesthetically pleasing addition to any living space, offering robust support for a television and comprehensive storage solutions, all while being user-friendly in its assembly and maintenance.

Coaster CONNECT IT Specifications

General IconGeneral
BrandCoaster
ModelCONNECT IT
CategoryIndoor Furnishing
LanguageEnglish

Related product manuals