Coats 875 - User Manual

1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 615/641-7533 800/688-6359 www.ammcoats.com Manual Part No.: 85008882 02
HENNESSY INDUSTRIES INC. Manufacturer of AMMCO
®
, COATS
®
and BADA
®
Automotive Service Equipment and Tools. Revision: 03/08
®
READ these instructions before placing unit in
service KEEP these and other materials delivered
with the unit in a binder near the machine for
ease of reference by supervisors and operators.
See
!Balancing Your
First Tire
on page 1.
775/875 Wheel Balancer
Installation Instructions
Operating Instructions
Safety Instructions
Maintenance Instructions

Summary

Important Safety Instructions

Owners Responsibility

Defines the owner's duties regarding machine and user safety, including following instructions and maintenance.

Operator Protective Equipment

Details personal protective equipment recommendations for safer tire servicing activities.

Safety Notices and Decals

Highlights critical warnings and instructions to prevent serious injury or property damage.

Standard Safety Devices

Operating the Balancer

Wheel Mounting

Provides guidance on selecting the most appropriate method for secure wheel mounting.

Standard Back Cone Mounting

Standard Front Cone Mounting

Control Panel And Display

Operation Functions Menu

875 - Entering Wheel Dimensions

875 - Automatic Dimension Presetting

875 - Exact Positioning Of The Adhesive Weight By Means Of The Gauge With Clips

775 - Manual Presetting Of Wheel Dimensions

Result of Measurement

Explains how to interpret the unbalance measurement results displayed.

Behind Spoke (Hidden Weight)

Correction Modes

875 - Manual Dimension Presetting

875 - t1-t2 Rims Setting

875 - c1-t2 Rims Setting

Self-Calibration

Maintenance Instructions

Diagnostic Procedures

After Balance Vibration Problems

Troubleshooting steps for persistent vibration after balancing.

Installation Instructions

Coats 875 Specifications

General

Brand	Coats
Model	875
Category	Wheel Balancers
Language	English