Chapter 3: Operate the system
40 Use a phone or fax machine
Call log
You can recall information of all incoming, outgoing and missed calls, as well
as standard and streaming data sessions. This data is stored in the call log of
the system. To view information on all calls do as follows:
1. Access the web interface from a connected computer, open a browser
and type the address: http://192.168.0.1 (default).
The DASHBOARD page is displayed.
2. Click CALLS. For further information, see Use the Call log on page 77.
If power to the system is interrupted, the information on the currently
ongoing calls (connection time) and data sessions (transferred data) cannot
be saved. This means that the airtime and bandwidth usage registered in the
Call log may be slightly inaccurate.
To make a call to the system
To make a call to a phone connected to the system do as follows:
Dial + <Mobile number>
+ is the prefix used in front of the country code for international calls.
Mobile number: The first part of the mobile number is always 870, which
is the prefix (“country code”) for the SwiftBroadband system.
Example: If you are calling from the USA and the mobile number for
standard voice is 870772420567 on your system, and you
want to make a call to the system, dial 011 870 772420567.
The phone numbers are listed in the documentation from your service
provider. If the mobile numbers are listed in the web interface, you can look
them up as follows:
1. Access the web interface from a connected computer, open a browser
and type the address: http://192.168.0.1 (default). The DASHBOARD
page is displayed.
2. Select PHONE BOOK > Mobile numbers. For further information, see
View and edit the mobile numbers on page 76.
To Next Page
Loading...
