Do you have a question about the COBHAM RT-7000 RMR and is the answer not in the manual?
Details FAA, FCC, and Industry Canada regulatory compliance for the RT-7000.
Lists and defines common acronyms used throughout the RT-7000 manual.
Identifies required programming tools and part number identification for RT-7000.
Outlines frequency bands, modes, and channeling for RT-7000 PMR/RMR radios.
Lists compatible antennas, their specifications, and installation requirements.
Describes the function and installation of the 118 MHz HPF for TSO certification.
Outlines steps for TSO-C169a certification and VHF ATC COM usage.
Explains various ways RT-7000 products can be connected and configured.
Provides power requirements for RT-7000 PMR, RCDU, RMR, and associated components.
Covers essential requirements for proper installation and cooling of units.
Details procedures and considerations for mounting aircraft antennas.
Provides guidance on selecting wires and routing for system connections.
Details pin assignments and signal definitions for the J101 connector.
Covers wiring considerations and connector pinouts for the RCDU.
Outlines procedures to verify proper system operation and configuration.
Provides a field checkout procedure when test equipment is limited.
Guides the installation of ICT and MCT software tools on a PC.
Explains how to use the ICT for radio configuration and data transfer.
Describes the main configuration screens for PMR, RMR, and RCDU.
Details common settings like microphone mode and impedance for PMR/RMR.
Explains how to configure display backlighting via lighting bus.
Covers specific configuration settings for RMRs and RCDUs.