COBHAM RT-7000 PMR User Manual

.
Refer to the DCA and associated markups for a complete
description of the changes incorporated in a revision.
DCA
DATE
DRAWN
CHECKED
APPROVED
PUBLISHED
-
W16217
10/04/16
John Blasi
Jim Bachelor
Robert Davis
10/04/2016
A
W16516
01/12/17
James Sneed
Jim Bachelor
Robert Davis
01/14/2017
B
W16695
02/27/17
James Sneed
Jim Bachelor
Robert Davis
02/28/2017
C
W16722
03/10/17
John Blasi
Jim Bachelor
Robert Davis
3/13/2017
D
W16826
04/05/17
M. Matyas II
John Blasi
Jim Bachelor
04/05/2017
E
W16847
04/13/17
Jim Blasi
James Sneed
Robert Davis
04/13/2017
F
W17106
07/06/17
M. Matyas II
John Blasi
Robert Davis
07/06/2017
G
W17626
10/10/17
M. Matyas II
John Blasi
Dave Urban
01/16/2018
H
W17881
04/02/18
James Sneed
John Blasi
Jim Bachelor
04/03/2018
J
W18069
05/29/18
James Sneed
John Blasi
Jim Bachelor
05/30/2018
K
W18148
06/21/18
James Sneed
John Blasi
Jim Bachelor
07/03/2018
L
W19293
08/26/19
James Sneed
John Blasi
Dave Urban
09/05/2019
M
W19934
07/23/20
John Blasi
Jim Buehring
Dave Urban
07/24/2020
N
W20007
09/03/20
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION.
NEITHER RECEIPT NOR POSSESSION OF THIS DOCUMENT CONFERS ANY RIGHT TO REPRODUCE, USE OR DISCLOSE, IN WHOLE NOR IN PART, ANY
INFORMATION CONTAINED IN THIS DOCUMENT WITHOUT WRITTEN AUTHORIZATION FROM WULFSBERG ELECTRONICS.
TEMPLATE 150-744545-01 REV. E
Chelton Avionics, Inc.
dba Wulfsberg Electronics Division
Prescott, AZ
CAGE
CODE
1WZE2
A PRINTED COPY OF THIS DOCUMENT MAY NOT BE THE
LATEST REVISION.
IT IS THE USER’S RESPONSIBILITY TO ENSURE THAT HE OR
SHE IS USING THE LATEST DOCUMENT REVISION.
THE LATEST REVISION MAY BE VIEWED OR PRINTED FROM THE
ELECTRONIC DOCUMENT DISTRIBUTION SYSTEM.
DOCUMENT TITLE
INSTALLATION MANUAL, RT-7000:
PMR, RCDU, RMR
SIZE
A
LRU
RT-7000:
PMR , RCDU,
RMR
DOCUMENT NUMBER
150-071724
REV
N
These commodities, technology or software are controlled in accordance with the United States Export Administration Regulations, Export Classification
Control Number (ECCN) EAR99. When exporting, diversion contrary to U.S. law is prohibited.
John Blasi
2020.09.03
14:37:42 -07'00'
Jim Buehring
2020.09.04 10:50:17 -07'00'
Digitally signed by David Urban
Date: 2020.09.04 11:06:14
-07'00'
Published
These commodities, technology or software
Are Controlled in accordance with the United
States Export Administration Regulations.
When exporting from the United States;
Diversion contrary to U.S. Law is prohibited.
2020.09.0
8 13:46:23
-07'00'

COBHAM RT-7000 PMR Specifications

General

Brand	COBHAM
Model	RT-7000 PMR
Category	Radio
Language	English

Summary

1 INTRODUCTION

1.1 COMPLIANCE

Details regulatory compliance for FAA, FCC, and Industry Canada.

1.2 ACRONYMS

Defines abbreviations and technical terms used in the manual.

2 MAINTENANCE INSTRUCTIONS

3 AIRWORTHINESS LIMITATIONS

4 SYSTEM COMPONENTS

4.1 PROGRAMMING EQUIPMENT AND IDENTIFICATION

Identifies programming tools, cables, and version numbers for RT-7000.

5 SYSTEM INSTALLATION

5.1 GENERAL

General overview of RT-7000 PMR, RMR, and RCDU system installation.

5.2 CERTIFIED INSTALLATIONS

Steps for installations requiring TSO-C169a certification for VHF ATC COM.

5.3 SYSTEM CONFIGURATIONS

Describes various setups and connections for RT-7000 series products.

5.4 COMPONENT SPECIFICATIONS

Details power requirements and specifications for RT-7000 components.

6 MECHANICAL INSTALLATION

6.1 GENERAL

General instructions and considerations for mechanical installation.

6.2 UNPACKING AND INSPECTING EQUIPMENT

Guidance on unpacking and visually inspecting equipment for damage.

6.3 GENERAL INSTALLATION REQUIREMENTS

Requirements for proper cooling, airflow, and mounting of the radio.

6.4 INSTALLATION OF MULTI-PIN CRIMP CONNECTORS

Info on contacts, crimp tools, and manufacturer for multi-pin connectors.

6.5 INSTALLATION OF RT-7000 PMR

Instructions for mounting the RT-7000 PMR unit.

6.6 INSTALLATION OF RT-7000 RMR

Instructions for mounting the RT-7000 RMR unit.

6.7 INSTALLATION OF RCDU

Instructions for mounting the RCDU unit.

6.8 INSTALLATION OF ANTENNAS

Guidelines for antenna installation, location, mounting, and preparation.

7 ELECTRICAL INSTALLATION

7.1 GENERAL

Describes wiring requirements and options for system component installation.

7.2 WIRING CONSIDERATIONS

Steps for system design, including wire selection and routing.

7.3 ELECTRICAL INSTALLATION OF THE PMR/RMR

Defines system interconnects for PMR/RMR through various figures.

7.4 ELECTRICAL INSTALLATION OF THE RCDU

Details wiring considerations for RCDU serial interface and power connectors.

8 SYSTEM VERIFICATION PROCEDURE

8.1 GENERAL

Overview of the checkout procedure to verify RT-7000 PMR system operation.

8.2 SYSTEM CHECKOUT

General system checkout steps, including setup and configuration.

8.3 TRANSMITTER TESTS

Procedures for testing transmitter functions, power, and modulation.

8.4 INSTALLATION CHECKOUT DATA TABLES AND CHECKLIST

Data tables and checklist for verifying installation and system configuration.

8.5 RAMP CHECKOUT PROCEDURE

High-level system assessment procedure for field use when test equipment is limited.

8.6 RCDU CHECKOUT PROCEDURE

Steps to verify RCDU front panel and operations, including touchscreen.

8.7 TROUBLESHOOTING

Contact info for technical support and troubleshooting common installation issues.

9 RT-7000 PMR/RMR CONFIGURATION AND PROGRAMMING

9.1 INTRODUCTION OF RT-7000 PMR/RMRS SOFTWARE PACKAGE

Overview of Cobham software tools (ICT, MCT) for RT-7000 configuration.

9.2 SOFTWARE INSTALLATION

Instructions for installing the Installer Configuration Tool (ICT) and Mission Configuration Tool (MCT).

9.3 SOFTWARE PACKAGE SYSTEM CONFIGURATION

Describes typical configurations for running RT-7000 software packages.

9.4 SOFTWARE OPERATION

Details on operating the Installer Configuration Tool (ICT).

9.5 TOP LEVEL CONFIGURATION SCREENS

Overview of configuration screens for PMR, RMR, and RCDU.

9.6 LIGHTING BUS CONFIGURATION (PRM AND RCDU ONLY)

How to configure display backlighting using aircraft lighting bus or front panel.

9.7 PMR / RMR / RCDU CONFIGURATION SETTINGS

Instructions for configuring PMR, RMR, and RCDU settings for system control.

9.8 28VDC LIGHTING CURVES

Displays the lighting curves for 28VDC backlighting.

9.9 OPERATING THE MCT

Information on operating the Mission Configuration Tool (MCT).