Do you have a question about the COBHAM RT-7000 Series and is the answer not in the manual?
Lists specifications for PMR, RMR, RCDU, antennas, and accessories.
Steps required for TSO-C169a certification and VHF ATC COM use.
Details how RT-7000 series products can be configured in various setups.
Provides detailed guidance on installing antennas, including location and preparation.
Provides steps for system design and wiring, including antenna selection.
Defines system interconnects for PMR/RMR electrical installation.
Details general system checkout steps, including electrical bonding and initial power-up.
Procedures for testing transmitter power, modulation, and side-tone audio.
Steps to verify receiver sensitivity and operation across different frequencies.
Explains how to operate the Installer Configuration Tool (ICT) for configuration tasks.
Describes the top-level configuration screens for PMR, RMR, and RCDU.
Details common configuration parameters for PMR and RMR.
Details the steps to enable MIC BIAS on the RT-7000 PMR/RMR.