This document contains proprietary information, see
proprietary statement on first page.
4.1.2 RT-7000 VERSION NUMBER AND PROGRAMMING
This section covers how to match your programming software and RT-7000 programming
together so you can program the right version of RT-7000 with the right software. There are
three tools used to program the RT-7000, the ICT, MCT and the Motorolla APX CPS. The ICT
and the MCT are both Cobham products that are available for download, upon request from
Cobham, with your RT-7000. The Motorola tools are only available from Motorola.
*Alternately you can find the part number on the display as the RT-7000 is booting up*
Figure 4-2 RT-7000 PN Identification
Programming Tools for 7000 series
Installer Configuration Tool for 7000 series products.
Mission Configuration Tool for 7000 series products.
Motorola Customer Programming Software (CPS)
Table 4-3: Programming Software
NOTE: YY represents the version of software tool that matches your 7000 series product.
These commodities, technology or software are controlled in accordance with the United States Export Administration Regulations, Export Classification
Control Number (ECCN) EAR99. When exporting, diversion contrary to U.S. law is prohibited.
To Next Page
Loading...
Need help?
General
