This document contains proprietary information, see
proprietary statement on first page.
4.1 PROGRAMMING EQUIPMENT AND IDENTIFICATION
4.1.1 PROGRAM CABLES
In the table and diagrams below you can identify the Programming cables and connections
required to program the RT-7000. As shown in Table Table 4-2: Programming Cables, you can
find the list of programming cables. In Figure 4-1 RT-7000 Programming Cable Diagrams, you
can find three diagrams showing the various ways to connect with the RT-7000.
Programming Cable Description
CABLE ASSY, MICRO-D to MOTOROLA GCAI Interface
CABLE ASSY, MICRO-D to KVL, CRYPTO KEY LOADING
CABLE ASSY, MICRO-D to RS-232, MISSION DATABASE
Table 4-2: Programming Cables
Cable Connection Diagram Motorola Tools
Aplicable to Motorola APX CPS and for the Motorola KVL3000 and KVL4000
COBHAM
RT7000
USB
HOME MENU
Cobham
APX
123-371761-XX
Motorola
APX CPS
129-271601
COBHAM
RT7000
USB
HOME MENU
Cobham
APX
123-371761-XX
129-271602
Motorola
KVL Keyloader
Cable Connection Diagam Cobham Tools
Applicable to the Cobham Tools ICT and MCT
COBHAM
RT7000
USB
HOME MENU
Cobham
ICT & MCT
129-271603-XX
Figure 4-1 RT-7000 Programming Cable Diagrams
These commodities, technology or software are controlled in accordance with the United States Export Administration Regulations, Export Classification
Control Number (ECCN) EAR99. When exporting, diversion contrary to U.S. law is prohibited.