Introduction
4
The channel designators are defaulted to the letter formats “A” (25 kHz
frequency separation) or “A
n
“ (12.5 kHz frequency separation). Any
additional explanatory naming can be added (see ADD NAME in Chapter
4 Configuring the radio on page 19.
If no dedicated naming is applicable users are encouraged to add
complimentary channel names as defined in table 2 and 3
(Recommendation ITU-R M.1174-3). Examples:
• 12 kHz operation: “A” - “CH 4”
• 12.5 kHz operation: “A
n
” - “CH 21”
• Both 25 and 12.5 kHz operation: “A
n
” - “CH 4 21”
Your dealer can perform any custom programming.
J
467.575 MHz 457.575 MHz
J
n
K
467.5375 MHz 457.5375 MHz
K
n
L
467.5625 MHz 457.5625 MHz
L
n
Channel designator
(preprogrammed)
Repeater RX Frequency Repeater TX Frequency
1711
To Next Page
Loading...
Need help?
General
