Maverick Boat Group
3207 Industrial 29th St. • Fort Pierce, Florida 34946
(772)-465-0631 • cobiaboats.com
to be going downward. Next, press down the macerator switch on the panel. This will
push the contents in the holding tank out the bottom of the boat through the waste
discharge thru hull. Once the process is complete it is advisable to close the discharge
valve and put the Y-valve handle back into the pump-out position. (The wide portion of
the handle covering the down arrow.)
The Jabsco Y-Valve is designed to provide flexibility of onboard waste management by
diverting waste either to the dockside pump-out fitting or directly overboard where legal
to do so. Check local and federal regulations to determine where direct overboard
discharge of untreated waste is permitted.
Note that the wide portion of the
handle is covering the down arrow.
The exposed arrows show the
direction of the flow up.
FLOW UP = DECK PUMPOUT
Note that the wide portion of the handle is
covering the up arrow. The exposed arrows
show the direction of the flow down.
FLOW DOWN = BOTTOM DISCHARGE
To Next Page
Loading...
