Maverick Boat Group
3207 Industrial 29th St. • Fort Pierce, Florida 34946
(772)-465-0631 • cobiaboats.com
DO NOT USE THE WINDLASS TO DRAG THE BOAT TO YOUR ANCHOR. THE
PROPER METHOD IS TO USE YOUR BOATS OWN POWER TO POSITION
YOURSELF RIGHT ABOVE THE ANCHOR AND THEN USE THE WINDLASS TO
HAUL THE ANCHOR. STAY CLEAR OF THE CHAIN, ROPES, AND GYPSY.
MAKE SURE THE ELECTRICAL MOTOR IS OFF WHEN WINDLASS IS USED
MANUALLY (EVEN WHEN USING THE HANDLE TO DISENGAGE THE
CLUTCH). IN FACT, PEOPLE WITH A REMOTE CONTROL MIGHT
ACCIDENTALLY OPERATE THEIR CONTROL. FASTEN THE CHAIN OR ROPE
WITH THE SAFETY LANYARD BEFORE MOVING TO NAVIGATION. DO NOT
OPERATE THE WINDLASS BY USING THE ELECTRICAL POWER WHEN THE
Closing the Clutch: The clutch provides a link between the gypsy and the main shaft.
The clutch is released (disengaged) by using the clutch handle which, when inserted into
the drum or gypsy cover, must be turned counter clockwise. The clutch will be re-
engaged by turning it clockwise.
To Next Page
Loading...
