Operation
Operation
PA (Public Address)
2524
PA (Public Address)
Connect an external PA speaker to the PA jack
on the rear panel.
Set CB/PA switch to PA position.
Push and hold the microphone button and
speak in a normal voice. Your voice will be
heard on the PA speaker.
Adjust the PA speaker volume with the
Dynamike® control.
Note
The PA speaker should have
8-ohm impedance and be rated
to handle at least 4.0 Watts.
Note
The speaker should be directed
away from the microphone to
prevent acoustic feedback.
Note
Activity on the CB channel
will be heard through the PA
speaker. Adjust the volume
control to a normal listening
level.
1
2
3
4
To Next Page
Loading...
