To Next PageTo Next Page
Need help?Do you have a question about the Cobra AirWave and is the answer not in the manual?
Connect audio cables to the CobraAirWave and stereo system.
Slide power switch to ON and connect the micro-USB cable for power.
The blue LED flashes, indicating the unit is powered and ready for pairing.
Press the blue button for 3 seconds to enter pairing mode.
Access device Bluetooth settings, scan, select CobraAirWave, and confirm pairing.
Steps to resolve issues like connection drops or pairing failures.
Reconnect by accessing your device's Bluetooth Manager and selecting CobraAirWave.
Disable Bluetooth on the current device to switch.
Pair with a new media device following pairing instructions.
Move the media device within 33 feet and ensure a clear line of sight.
Connection may automatically re-establish within 15 seconds.
Re-pair if connection is lost for over 45 minutes.
Describes states like Passive Discovery, Pairing Mode, Connected, Play/Pause.
Indicates battery charging status when powered via USB.
Shows battery charge level (Sufficiently Charged, Low Battery, Dead Battery).
Checks power, cables, stereo, and device settings for audio output problems.
Verifies range, Bluetooth connection, and media device settings.
Lists Bluetooth technology, built-in battery, and included cables.
Highlights wireless streaming, battery life, and cable types.
Details dimensions, weight, and pack quantities for the product.
Lists Bluetooth version, range, and simultaneous pairings.
Covers power requirements and operating temperature range.
General
