Product Features
Using Your Radio
Listening for a Response
•
Release the Talk button to receive incoming
transmissions. Your microTALK
®
radio is always in
Standby mode while the Talk or Call buttons are
not pressed.
To Adjust Volume
•
Press the Volume Up or Volume
Down button.
A double beep sound is used to indicate
the minimum and maximum volume levels
(1 through 8).
Call Button
•
Press and release the Call button.
The other person will hear a three second call tone. This
tone is used only to establish voice communications.
See page 14 on how to select between ten
call tone settings.
08
PMR
Call Button
Listening
Volume Level
LED/S.O.S. Flashlight
•
Press and release the LED flashlight button below
the TALK button to use the LED flashlight located at
the bottom of the radio.
To activate S.O.S. function, press and hold the LED
flashlight button to turn on. Press and release to
turn off the flashlight or S.O.S. function.
Auto Squelch/Maximum Range
•
Your microTALK
®
radio will automatically shut off weak transmissions
and unwanted noise due to terrain, conditions or if you’ve reached your
Maximum Range limit.
Can temporaily turn off auto squelch for having maximum range
extension allowing all signals to be received and extending the
maximum range of your radio
To Next Page
Loading...
Need help?
General
