Connecting Your Charging Cables
5
Do not connect the battery charger into an AC outlet until all other connections have
been made. Do not make any connections to the carburetor, fuel lines, or thin metal sheet
parts. The instructions provided are for a negative ground system commonly found in
most passenger vehicles. If your vehicle is a positive ground system, simply follow the
instructions in reverse order.
1. Connect the positive (red) alligator clamp or O-ring terminal to the positive battery terminal
2. Connect the negative (black) alligator clamp or O-ring terminal to the negative battery
terminal or vehicle chassis.
3. Connect the opposite end of your cable to the battery charger main cable.
4. Connect the battery charger into a suitable electrical outlet.
Determine which connection type
is needed (Alligator or O-ring)
Connect either the alligator clamps
or O-ring terminals to your battery.
(First, red to positive, then black
to negative).
Connect the opposite end of your
cable to the battery charger main
cable
Plug the battery charger into a
suitable electrical outlet
O-Ring Terminals
Alligator Clamps
To Next Page
Loading...