EasyManua.ls Logo

Cobra Battery Charger 2A - Display Light Overview; LED Status and Conditions

Cobra Battery Charger 2A
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Display Light Overview
7
Standby Power Unit is on and in standby mode,
Indicator waiting to begin charging.
There is a possible battery short or the
Bad Battery battery will not hold a charge. Have
the battery checked by a professional.
Battery Charger cables are connected
Reverse Polarity to the battery in reverse. Reverse the
cable connections.
LED Condition
Charger plugged in but not connected to a
battery. Please connect either the alligator or
o-ring cables to the desired battery and select
the corresponding battery type on the Battery
Charger to begin charging.
The battery is charging.
Charging complete.
Low voltage mode. The battery charger uses
low voltage mode to charge batteries whose
voltage is too low for normal operation.
NOTE: For detailed operation including low voltage mode, please
see the full product manual at
cobra.com/manuals
No LED
Blinking Orange
Solid Green
Blinking Red
and Green

Related product manuals