22
LED
SIGNAL
ALARM DESCRIPTION
1 blink
doors, boot have
been opened
ultrasonic volumetric
sensor triggered
3 blinks
bonnet has been opened
4 blinks
attemp to start
(ignition key/hotwire)
5 blinks
not used / Cobra Bus
speedometer
input/alarm
6 blinks
2 blinks
7 blinks
activation of speed alert
sensor input / additional
sensors
Alarm memory - BRIDGE 4100
5 - ALARM MEMORY
If an alarm has occurred the buzzer and the turn indicators will give four signals. The alarm status history is displayed the LED when
the system is disarmed, and will remain available until the system rearmed or the ignition will be switched ON.
The flashes from the LED show what caused the alarm.
06DE2142E.pmd 11/02/2008, 11.1522
To Next Page
Loading...
