EasyManua.ls Logo

Cobra Bridge compact alarm - User Manual

Cobra Bridge compact alarm
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Cod. 06DE1250C del 05/98
CAR SECURITY
®
allarme compatto BRIDGEallarme compatto BRIDGE
allarme compatto BRIDGEallarme compatto BRIDGE
allarme compatto BRIDGE
FITTING INSTRUCTION AND USER MANUALFITTING INSTRUCTION AND USER MANUAL
FITTING INSTRUCTION AND USER MANUALFITTING INSTRUCTION AND USER MANUAL
FITTING INSTRUCTION AND USER MANUAL
MANUALE INSTALLAZIONE E UTENTEMANUALE INSTALLAZIONE E UTENTE
MANUALE INSTALLAZIONE E UTENTEMANUALE INSTALLAZIONE E UTENTE
MANUALE INSTALLAZIONE E UTENTE
BRIDGE compact alarmBRIDGE compact alarm
BRIDGE compact alarmBRIDGE compact alarm
BRIDGE compact alarm
○○○○○○○○○○○○○○○○○○○○○○
ATTENTION !ATTENTION !
ATTENTION !ATTENTION !
ATTENTION !
KEEP THE PIN (Personal Identification Number) together with your
personal documents. THE PIN IS REQUIRED IF YOU NEED TO
DISARM THE SYSTEM in emergency condition and to add or change
radio remote controls to the system
○○○○○○○○○○○○○○○○○○○○○○
ATTENZIONE !ATTENZIONE !
ATTENZIONE !ATTENZIONE !
ATTENZIONE !
CONSERVATE IL PIN (Codice di Identificazione Personale) insie-
me alla patente di guida VI SERVIRÀ PER DISINSERIRE IL
SISTEMA IN CASO DI EMERGENZA e per accedere alla proce-
dura di autoapprendimento dei telecomandi.
EMERGENCY KEY CARD
a
OK
+
+
=
MAX 7 SEC.
PIN CODE =
IGN
O
N
ON
O
FF
OFF
IGN
O
N
ON
O
FF
OFF
IGN
O
N
ON
O
FF
OFF
ON 3 SEC.
PIN

Questions and Answers

  • G
    Greg Hernandez IIJul 31, 2025
    How to resynchronize Cobra Bridge compact alarm radio control?
    • J
      Jessica MataJul 31, 2025
      If the radio control for your Cobra Car Alarm isn't working, it might be out of sync. To fix this, press and hold both buttons on the radio control until the LED turns off, then release them (the LED will stay on). Next, press button A; the LED should flash. This should resynchronize the control. Press button A again to check if it's working.
  • D
    David DavisAug 5, 2025
    What to do if Cobra Car Alarm generates false alarms?
    • C
      christinewilsonAug 5, 2025
      If your Cobra Car Alarm is generating false alarms, the volumetric hyperfrequency sensor (if installed) may be in the wrong location, such as under the glove compartment where metal objects are stored. Alternatively, it might be too sensitive and detecting movement outside the car. To resolve this, move the sensor away from metal parts and repeat the setup procedure.
  • K
    Katie SchwartzAug 10, 2025
    How to correct positive feed wire connection for Cobra Bridge compact alarm?
    • J
      johnandersonAug 10, 2025
      If the positive feed wire connection for your Cobra Car Alarm isn't correct, connect the red wire close to the interior light fuse.
  • N
    Nicole HayesAug 15, 2025
    Why Cobra Bridge compact alarm Car Alarm windows don't close?
    • J
      Jeffrey NewmanAug 15, 2025
      If the windows aren't closing with your Cobra Car Alarm system, the window or CDL output time setting might be incorrect. To fix this, select the correct output time setting.
  • D
    Donna TurnerAug 20, 2025
    What to do if voltage drop sensor is activated in Cobra Bridge compact alarm?
    • B
      bperezAug 20, 2025
      If the voltage drop sensor in your Cobra Car Alarm is activated even when devices are running with the engine off, you should deactivate the voltage drop sensor.
  • P
    Paul LawsonAug 26, 2025
    What to do if Cobra Bridge compact alarm Car Alarm lifting sensor is near a heat source?
    • T
      Taylor CaseyAug 26, 2025
      If the lifting sensor in your Cobra Car Alarm is near a heat source, check its position and move it.

Summary

Fitting Instruction and User Manual

The Total Protection for Your Car

Contents of the Kit

Lists all components included in the Cobra vehicle security system package.

Warranty Conditions

Use and Maintenance of the System

Basic Operations and Special Functions

Sensor Deactivation and Emergency Procedures

Emergency Unset with Electronic Keys

Explains how to disarm the system using electronic keys in emergencies.

Radio Control and Arming Procedures

Product Feature Comparison

System Component Positioning

Sensor Installation and Electrical Connections

System Electrical Connections Guide

Guidance on making electrical connections for the alarm system components.

System Programming

Programming Procedure Steps

Detailed steps to enter and perform system programming using the remote.

System Configuration Tables

System Functions Configuration Table

Reference table for system functions and their settings.

Emergency Electronic Key Auto-Learning

System Operation and Functional Tests

Voltage Drop Sensor Test

Troubleshooting Common Issues

Cobra Bridge compact alarm Specifications

General IconGeneral
BrandCobra
ImmobilizationYes
Shock SensorYes
SirenYes
Voltage12V
ModelBridge Compact Alarm
CompatibilityVehicles with CAN bus

Related product manuals