What to do if my Cobra AK4169 Car Alarm is not arming?
If your Cobra Car Alarm is not arming, the fuse might be blown. Check the vehicle's Dome 7.5A fuse. Alternatively, the alarm central unit (ACU) could be damaged or disconnected, or the alarm wire harness might be damaged. In these cases, contact your Cobra or Toyota dealer.
Why does my Cobra AK4169 Car Alarm keep going off?
Several factors can trigger false alarms in your Cobra Car Alarm. The intrusion (ultrasonic) sensors might be damaged, detached, or incorrectly oriented. Passive arming could be activated. An open window or sliding roof can also cause it. Hanging clothes or dangling accessories inside the car might be the reason. People or animals inside the car can also trigger it. Finally, a defective door, boot, or bonnet switch could be the culprit. To resolve this, check the sensors and contact your Cobra or Toyota dealer. Deactivate passive arming. Close all windows and the sliding roof, or bypass the intrusion sensor. Remove or secure any hanging items. Bypass the intrusion or option sensors if there are people or animals inside. Contact your Cobra or Toyota dealer if you suspect a defective switch.
Why is my Cobra Car Alarm always ON?
If your Cobra Car Alarm is always ON, the system may be in programming mode. To exit programming mode, close the bonnet.
How to stop 10 chirps from Cobra AK4169?
The 10 chirps from your Cobra Car Alarm indicates that a door or the bonnet is open. Ensure that all doors are fully closed.
What does blinking fast at IGN ON mean on Cobra AK4169 Car Alarm?
If your Cobra Car Alarm LED is blinking fast when the ignition is ON, it indicates that garage mode is activated. Please refer to chapter 3.7 for more information on Garage mode.
What to do if Cobra AK4169 gives 5 chirps?
If your Cobra Car Alarm gives 5 chirps, this means the alarm went off while the system was armed. Record the number of LED flashes and contact your Cobra or Toyota dealer.
What does 8 chirps mean on Cobra AK4169 Car Alarm?
When you hear 8 chirps from your Cobra Car Alarm, it indicates a wire harness connection problem or siren failure. Contact your Cobra or Toyota dealer to find the cause.
Why is my Cobra AK4169 always OFF?
If your Cobra Car Alarm is always OFF, it indicates a system problem. Please refer to 'No arming' for more information.
Lists core functions like perimetric protection, sensor capabilities, and siren features of the Cobra alarm system.
Details situations triggering the alarm and factors that may cause false alarms from the intrusion sensor.
Step-by-step guide on inputting the 4-digit PIN using the LED push button for system access.
Instructions for arming the system via remote, including visual and audible indicators and pre-arm time.
Steps to disarm the alarm system using the remote control, with corresponding indicator feedback.
Procedure to stop the siren and disarm the system, applicable for both remote types.
How to bypass the intrusion sensor for specific situations like leaving a window ajar.
Instructions for bypassing optional sensors (inclination, PIR) for specific use cases.
Details the system's automatic re-arming feature if doors remain closed after disarming.
Explains the meaning of the LED status light for normal operation and diagnostics.
Information on the siren's integrated battery backup and its recharging process.
Describes the default door/bonnet ajar warning feature activated during arming.
How to override the alarm system when the remote control is unavailable or non-functional.
Details the feature for automatic door locking/unlocking based on ignition status.
Explains the passive arming mode for automatic system arming without vehicle locking.
Instructions on activating the vehicle finder feature to locate the car via hazard lights.
How to identify the cause of a past alarm trigger by counting LED flashes.
Procedure to temporarily deactivate the alarm system for vehicle servicing.
Information regarding the optional audible chirp feedback for arming/disarming.
Note that chirp volume adjustment requires contacting a dealer.
Detailed steps for replacing the battery in the Cobra remote control unit.
To Next Page
General