Cobra AK4169 - Arming Without Intrusion Sensor Bypass

7
2.4. Arm without the intrusion sensor
If the vehicle is to be locked with someone inside (passenger, children or a pet), or if you
want to leave a window partially open, then the intrusion sensor must be deactivated (by-
passed) as follows:
Activation steps
Hazard light
indication
Alarm status light
(LED)
Buzzer (chirp)
1
Lock the vehicle
using the remote
control
Flashes once
ON for 30 seconds
1 chirp (if feature
is enabled)
2
During the first 30
seconds, press
lock button again
once
Flashes once
ON for 30 seconds
1 chirp (if feature
is enabled)
Summary:
- Press the remote control lock button twice within 30 seconds.
Important:
- The intrusion (ultrasonic) sensor is by-passed for 1 use only. Next time the system is
armed the intrusion sensor is automatically activated again.