Cobra AK4169 User Manual

8
2.5. Arm without the optional sensor
For example, if the system has an inclination (level) or PIR (canopy protection) sensor and
you want to deactivate (by-pass) the sensor while travelling on a boat, train or leave a pet
in the vehicle.
If the alarm system is equipped with an optional sensor, it can be by-passed as follows:
Activation steps
Hazard light
indication
Alarm status light
(LED)
Buzzer (chirp)
1
Lock the vehicle
using the remote
control
Flashes once
ON for 30 seconds
1 chirp (if feature
is enabled)
2
During the first 30
seconds, press
lock button again
once
Flashes once
ON for 30 seconds
1 chirp (if feature
is enabled)
3
During the first 30
seconds, press
lock button again
once
Flashes once
ON for 30 seconds
1 chirp (if feature
is enabled)
Summary:
- Press the remote control lock button three times within 30 seconds.
Important:
- The sensor is by-passed for 1 use only. Next time the system is armed the sensor is
automatically activated again.
2.6. Automatic re-arming
If the vehicle is unlocked using the remote control and the boot or doors are not opened
within 30 seconds, the alarm system will automatically re-arm when the vehicle
automatically relocks.

Cobra AK4169 Specifications

General

Brand	Cobra
Model	AK4169
Category	Car Alarm
Language	English