12
5.
When mounting up the throttle cable there is two options,
- Option 1- Z shape cable to be mounted in hole on throttle linkage. Refer to red circle in Fig.
9
- Option 2 ā Cut Z shape off throttle cable and mount into linkage slot nut.
Refer to red circle in Fig. 10
6.
Clamp down throttle cable. Refer to red circle in Fig. 11
7.
Reinstall the air filter base, screws, air filter and air filter cover. (Check that air filter seal is in
place. Refer to red circle in Fig. 12)
Fig.9 Fig. 10
Fig. 11 Fig. 12