COMPLETE INSTRUCTIONS
G100
56
FACTORY PROGRAMMING
Long Flashing
Short Flashing
1
COBRA BUS SIREN
2 EXTERNAL MODULE VIA COBRA BUS
3 ENGINE CUT-OFF 1 VIA COBRA BUS
4 NOT USED
5 NOT USED
6 ICD 31 VIA COBRA BUS
7 NOT USED
8 NOT USED
ENABLE DISABLE
ENABLE DISABLE
ENABLE DISABLE
ENABLE DISABLE
PAGE 6
ADVANCED FUNCTIONS TABLE
THE
CONF
I
GUR
ATION OF THESE
PAGE 6 TABLE FUNCTIONS CAN BE PERSONALISED BY YOU IN RELATION
TO THE ACCESSORIES PROVIDEDIN THE KIT, FOLLOWING THE PROGRAMMING PROCEDURE
.
THE
T
AB
LE
6
DATA CAN BE UTILISED ONLY IN THE CASE OF FAULTY OPERATION OF AN ACCESSORY
CONNECTED TO THE COBRA BUS, AND IT WILL THUS BE POSSIBLE TO DEACTIVATE IT
.
THE CONNECTION
OF THE MODULES TO THE COBRA BUS DOES NOT HAVE TO BE ACTIVATED,
AS THE COBRA BUS SELF-LEARNS THE ACCESSORIES THAT ARE CONNECTED
.
To Next Page
Loading...
