Need help?Do you have a question about the Cobra GLOBE 4800 CAN and is the answer not in the manual?
Procedure for setting a personal PIN code for system access and emergency override.
Steps to arm the system, including indicator signals and activation timer.
Details system alarm activation for bonnet, boot, doors, and volumetric intrusion.
Instructions on how to stop an active alarm by disarming the system.
Steps to disarm the system, including indicator signals and immediate deactivation.
Enables or disables the buzzer for arm/disarm signals.
Sets internal volumetric protection sensitivity to Low or High modes.
Signals if doors, bonnet, or boot are open during arming.
Automatically arms the system after a set delay when ignition is off.
Adds an alarm trigger function to the immobilizer automatic arming.
Automatically rearms the immobilizer if ignition is not used after disarming.
Resumes armed state after disarming if ignition is not activated.
Consequences and lack of recovery options if the personal PIN code is lost.
Checks for volumetric sensor triggers and closed vehicle openings.
Troubleshooting for remote control issues and central door locking.
To Next Page
General
