COMPLETE INSTRUCTIONS
G100
60
SIREN
ON
ALARM
SYSTEM
DISARMED
PIN CODE
OK
Press for a number of
times equal to the figure
in the PIN code
Enter next
PIN CODE
figure
Short
flash
Long
flash
pause
19 - EMERGENCY.
To disarm the system without using the radiocontrol device, proceed as follows:
press the button on the emergency panel for a number of times equal to the first figure of
your
Pin
Code. For each press on the key, the LED will give a fast flash. A longer
pause will
be interpreted by the system as meaning that you have finished entering a figure, which
will be signalled by the LED with a long flash
.
Proceed to enter all the other figures in the
code in the same manner
.
When all the figures have been entered, if the code is correct
the system will disarm
.
To Next Page
Loading...
