EasyManua.ls Logo

Cobra HH 50 WX ST - The SoundTracker System; Sound Clarity Measurement; How SoundTracker Works on Reception; How SoundTracker Works on Transmission

Cobra HH 50 WX ST
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
19
Note
SoundTracker® gives you
clearer, cleaner reception to
improve CB communications
while on the air.
The SoundTracker® System
While previous systems only “blanket outor
limit noise in higher sound frequencies, the
revolutionary SoundTracker® System actually
reduces noise while leaving the signal intact in
the reception mode. In the transmission mode,
it actually strengthens the signal, providing you
with a significant reduction in noise on reception
and transmission.
Sound clarity is measured by the ratio
of the signal level to the noise level.
The higher the signal-to-noise ratio,
the better the sound.
How SoundTracker® Works
On Reception - “Cuts noise coming in”
With a normal CB, distant signals fall below
the squelch level and are unintelligible. With a
SoundTracker® CB. the noise level is cut up to
90%, which increases the signal-to-noise ratio
and dramatically improves signal clarity. This also
allows you to significantly reduce the squelch
level, which greatly expands your listening range.
On Transmission - “Strengthens signals going out”
A SoundTracker® CB strengthens the transmit
signal by more effectively using the available
RF power output of the CB. The result is improved
transmission signal clarity and an expanded
transmission range.
S~u
N
o-1-RA.cKe
R~
100
~
SYSTEM
Normal
CB
Signal
Near Medium Far
Distance between CB's
SoundTracker®
CB
Signal
Signal
Signal
S uelch Level
Near Medium Far
Distance between CB's

Related product manuals