Cobra LT86MRL - 3. UNPACKING AND ASSEMBLY; 3.1 UNPACKING

11
3. UNPACKING AND ASSEMBLY
For storage and transport purposes, some components of the machine are not installed in the factory and have to
be assembled after unpacking.
Follow the instructions below:
The machine is supplied without engine oil or fuel. Before starting the engine, fill with oil and fuel
following the instructions given in the engine manual.
3.1 UNPACKING
When unpacking the machine, take care to gather all individual parts and fittings, and do not damage the cutting
deck when taking the machine off the pallet.
1. Machine body
2. Steering connect shaft
3. Towing bracket
4. Bumper
5. Bumper bracket L
6. Bumper bracket R
7. Steering wheel cover
8. Steering wheel
9. Splined hub
10. Steering shaft cover
11. Instruction manual
12. Nuts, bolts, washer, bushing and starter key
13. Tools
14. Seat
15. Grass-catcher
component
16. Rear baffle plate
component.