Cobra LT86MRL - 6.2 SCHEDULED MAINTENANCE

28
6.2 SCHEDULED MAINTENANCE
The above working hours are a guide. Service the tractor more frequently in dusty conditions or extreme
heat. Always refer to the engine manual for further details and instructions on service intervals.
At the first signs of wear, contact your Cobra dealer replace worn parts. General lubrication of all joints should be
carried out annually and when ever the machine is to be left unused for a long period.
A qualified technician should complete all required service work. Please refer to your local
Cobra dealer for service and warranty repairs.
For the following situations, please contact your dealer: blade vibrates, blade tears the grass, blade engagement is
problematic, tractor does not brake correctly, movement is erratic.
If the cut is uneven, the alignment of the cutting deck will be necessary. A service dealer will be able to complete
this task.
6.2.1 Engine
Follow all the instructions in the engine manual.
To empty the engine oil, unscrew the oil plug. When refitting the plug, make sure the seal is positioned correctly.
1. MACHINE
1.1 Check oil engine
Before each use
1.2 Tyres pressure check
Before each use
1.3 Safety checks & Controls
Before each use
1.4 Checking damage on
products
Before each use
1.5 Cleaning global product
After each use
1.7 Check of fastening and
sharpness blades
Each 25 hours
1.8 Transmission belt check
Each 25 hours
1.9 Blade blet check
Each 25 hours
1.10 Bolt and screw check
Each 25 hours
1.11 General Lubrication
Each 25 hours
1.12 Blade replacement Each
Each 100 hours
1.13 Global maintenance
review made by Authorized
Dealer or Service Centre
Every year
2. ENGINE
2.1: First Oil change
After 20 hours
2.2 Oil engine change
Each 50 hours
2.3 Air filter cleaning
Each 50 hours
2.4 Check and adjust Spark
Plug
Each 100 hours
2.5 Fuel tank and fuel filters
cleaning
Each 100 hours
2.6 Air filter replacement
Every year
2.7 Spark plug replacement
Every year