Cobra Micro Talk 2 User Manual

Advanced Features
Note
For more information see
Talk Confirmation Tone
section on page 14.
Note
To restore the Talk
Confirmation Tone repeat
steps 1- 3 as shown to
the left.
Note
When you push and hold the
PTT button,the unit exits out
to operational mode.
If,after 10 seconds no selec-
tion is made, the unit will
return to operational mode.
Talk Confirmation Tone Indicator
To te m po ra rily eliminate the Talk Co n f i rm ation To n e :
27
Push and hold button. icon will
disappear or press and hold function key to
proceed to next function.
3
Push and re l e a s e b u t ton until icon flashes.
1
Push and release b u t tons until OFF icon
appears in the LCD display.
2
Advanced Features
Note
The Key Stroke Tone and Talk
Confirmation Tone can be
temporarily turned on or off
at any time while in opera-
tional mode.
Tone Setting
The Key Stroke Tone and Talk Confirmation Tone
can be temporarily turned on or off during the
operation of your MicroTalk 2 2-Way Radio.
Key Stroke Tone Indicator BEEP
You will hear an audible tone when any button is
pushed (except PTT button). You can turn the
audible tone on or off by:
Tone
Settings
26
To return to the audible mode, push and hold
button until
BEEP icon appears in the LCD
display.
Push and hold button until BEEP icon
disappears in the LCD display.
1
2
Func
Enter
Channel
Enter
Enter
FRS250 manual.final.qx 10/1/98 2:43 PM Page 32

Cobra Micro Talk 2 Specifications

General

Brand	Cobra
Model	Micro Talk 2
Category	Two-Way Radio
Language	English