Advanced Features
25
Advanced Features
24
Note
Unit must be in operational
mode to test ring.
Ringer
Your MicroTalk 2 will signal you that there is an
incoming transmission with a ring tone.
Ringer
RingerTest
To test the ringer mode:
Rotate ON - OFF Volume Control clockwise.
An audible “tone”will indicate the unit is on
and then the LCD will go through a 3 second
self-test and then go to operational mode.
Push and hold button.
Quickly push and release button. Unit will
ring for 5 seconds.
1
2
3
Call
Enter
FRS250 manual.final.qx 10/1/98 2:43 PM Page 30
To Next Page
Loading...
