Cobra microTALK MT 200 User Manual

LLCCDD
DDiissppllaayy
SSppeeaakkeerr//
MMiiccrroopphhoonnee//
CChhaarrggee JJaacckk
CCaallll BBuuttttoonn
TTaallkk BBuuttttoonn
Press and hold to communicate
with others. With the microphone
about five cm (2 inches) from your
mouth, speak in a normal voice.
Release the Talk button when you
are finished talking and listen for a
response. You cannot receive
incoming calls while pressing the
Talk button.
NOTE Both radios must be
tuned to the same channel
to communicate.
Press and release to alert
others that you are calling.
TWO-WAY RADIO MODEL
MT 200
Nothing Comes Close to a Cobra
®
English
RRaaddiioo CCoonnttrroollss
aanndd IInnddiiccaattoorrss
Printed in the Philippines
Part No. 480-255-P
Version A
MMooddee//PPoowweerr BBuuttttoonn
UUpp//DDoowwnn BBuuttttoonnss
Press and hold to turn
the radio on or off.
Press and release to
enter mode function to
change channels.
The channel numbers
will blink when that
mode is selected. Use
the Up/Down buttons
to select a channel.
Press and release to
adjust the volume.
While in mode
function, press and
release to change
channels.
9498 MT200-EU-British4F 4/10/06 2:38 PM Page 1

Cobra microTALK MT 200 Specifications

General

Brand	Cobra
Model	microTALK MT 200
Category	Two-Way Radio
Language	English

Summary

Radio Controls and Indicators

Talk Button

Press and hold to communicate; release to listen. Cannot receive while talking.

Speaker/Microphone/Charge Jack

Port for speaker, microphone, and charging the radio.

Mode/Power Button

Press and hold to turn on/off; press to enter mode for channel changes.

Call Button

Press and release to alert others that you are calling.

Up/Down Buttons

Press and release to adjust volume or change channels.

Batteries and Wall Charger

Batteries

Instructions for installing or replacing AAA rechargeable or alkaline batteries.

Wall Charger

How to connect the wall charger to the radio and electrical outlet for charging.

Backlit LCD Display

Channel Number Display

Indicates current channel (1-8) while in standby or selecting channels.

Transmit Indicator

Visible on the LCD display when transmitting a message.

Receive Indicator

Visible on the LCD display when receiving a message.

Battery Low Indicator

Blinks when battery power is low; radio may enter battery save mode.

Channel/Volume Indicator

Shows 'CH' for channel mode or 'LE' for volume adjustment.

Warranty and Customer Service Information

Declaration of Conformity

States compliance with R&TTE Directive, EMC, and Electrical Safety standards.

Warranty & Customer Service

Information for warranty claims and customer service support.