2. Press the MODE button
until the Dual Watch icon
flashes.
3. Push the CHANNEL SELECT
button up or down to select
the second channel you wish
to monitor.
4. Press the MODE button. The privacy code flashes.
5. Push the CHANNEL SELECT button up or down to select the
second privacy code.
6. Press and release the LOCK button to store the second
channel/privacy code and engage Dual Watch.
7. To terminate Dual Watch and return to normal Standby mode,
press and release the LOCK or TALK button.
Using Baby Monitor
With the Baby Monitor function on, a radio left near a baby
will transmit to another unit on the same channel whenever a
sound is detected. Baby Monitor uses the same sensitivity
level you set for the VOX function. If you have not set a VOX
sensitivity level, the maximum sensitivity level 5 will
automatically be used. To turn Baby Monitor ON:
1. Press and release the MODE
button until the Baby Monitor icon
flashes. The setting will be OFF.
2. Press CHANNEL SELECT
button up or down to change
the setting to ON. Press LOCK to
activate BABY MONITOR. The icon will remain on.
3. To turn Baby Monitor OFF, press and release the TALK button.
Turning Roger Beep Off and On
With Roger Beep turned on, your listener will hear an audible
tone when you release the TALK button. To change Roger
Beep mode:
1. Press the MODE button
until the Roger Beep icon
flashes and the current setting
(“on” or “off”) is displayed.
2. Push the CHANNEL SELECT button up or down to turn
Roger Beep on or off.
3. Press and release the LOCK button to enter the new
setting, or press the MODE button to enter the new setting
and proceed to other functions.
Turning Keystroke Tones Off and On
With Keystroke Tones turned on, your unit will sound beeps
each time you press a button or change a setting. To change
Keystroke Tones mode:
1. Press and hold the LOCK button for 5 seconds to turn
keystroke tones off. A double beep will sound and the Beep
icon will disappear.
2. To turn keystroke tones back on, press and hold the LOCK
button for 5 seconds again. A double beep will sound and the
Beep icon will appear. (NOTE: The unit must not be in Lock
mode during these steps.)
Intercom
With the optional intercom adapter and two external
speaker/microphone attachments, a single microTALK
®
radio
can be used as an intercom system. (Ideal for motorcyclists.)
OPERATION • ADVANCED FEATURES
MODE button
MODE button
MODE button
LOCK
button