Cobra PR561 BLT - Channel Scan

16
Channel Scan
•
Your microTALK
®
radio can automatically scan channels.
To scan channels:
1. Press and release the Scan button, the Scan icon
and the channel numbers appear on the display.
2. Press and hold the Scan button to begin scanning
channels.
The radio ignores specific privacy
codes while scanning channels.
The Scan icon will continue to be displayed when
scan is on. Your radio will continue to scan all
channels and stop if an incoming transmission is
detected. Your radio will remain on that channel for
4 seconds.
During scanning (while receiving an incoming transmission),
you can choose from the following:
a. Press and hold the Talk button to communicate on that channel. Your
radio will remain on that channel and return to Standby mode.
b. Press the Channel Up or Channel Down button to resume
scanning channels.
c. Press and hold the Scan button to return to Standby.
Scan Channels
M
E
M
E
S
C
M
a
x
R
a
n
g
e
H
I
/
L
O
W
S
c
a
n
PR561
Channel Button
M
E
M
E
S
C
M
a
x
R
a
n
g
e
H
I
/
L
O
W
S
c
a
n
PR561
Scan Button