Cobra PRO Series User Manual

25 | Page
SPECIFICATIONS
MAINTENANCE & PRODUCT SERVICE
Maintenance
Very little maintenance is required to keep the inverter operating properly. The exterior of the unit should
be cleaned periodically with a damp cloth to prevent accumulation of dust and dirt. At the same time,
tighten the screws on the DC input terminals. Be sure vents and fans are free of dust or debris.
Product Service
For any questions about operating or installing this new Cobra product, please go to www.cobra.com
Specifications:
PRO 1500W
PRO 2500W
PRO 3000W
Model
CPI1500W
CPI2500W
CPI3000W
Input
13.0V DC
13.0V DC
13.0V DC
Output
115V AC, 60Hz, 13.0A, 1500W
115V AC, 60Hz, 21.7A, 2500W
115V AC, 60Hz, 26.1A, 3000W
Output Waveform
Modified Sine Wave (MSW)
Modified Sine Wave (MSW)
Modified Sine Wave (MSW)
Continuous Power
1500 Watt
2500 Watt
3000 Watt
Peak Power
3000 Watt
5000 Watt
6000 Watt
Efficiency
90%
90%
90%
No Load Draw
< .6A
< .6A
< .6A
Low Battery Alarm
11.5V DC Default, 10.5V Selectable
Option
11.5V DC Default, 10.5V
Selectable Option
11.5V DC Default, 10.5V
Selectable Option
Low Battery Shutdown
10.5V DC Default, 9.5V DC Selectable
Option
10.5V DC Default, 9.5V DC
Selectable Option
10.5V DC Default, 9.5V DC
Selectable Option
USB-A Output Port
5V/3.0A, 9V/1.67A Fast Charge
5V/3.0A, 9V/1.67A Fast Charge
5V/3.0A, 9V/1.67A Fast
Charge
USB-C Output Port
5V/3.0A, 9V/1.67A Fast Charge
5V/3.0A, 9V/1.67A Fast Charge
5V/3.0A, 9V/1.67A Fast
Charge
AC Output Socket
4 GFCI Protected AC Outputs
4 GFCI Protected AC Outputs
4 GFCI Protected AC Outputs
Protection
Overload, Over Temperature,
Short Circuit, Reverse Polarity,
Over/Under Voltage and GFCI
Overload, Over
Temperature, Short Circuit,
Reverse Polarity,
Over/Under Voltage and
GFCI
Overload, Over
Temperature, Short Circuit,
Reverse Polarity,
Over/Under Voltage and
GFCI
Operating Temperature
-10°C/14°F - 40°C/104°F
-10°C/14°F - 40°C/104°F
-10°C/14°F - 40°C/104°F
Storage Temperature
-40°C/-40°F - 65°C/149°F
-40°C/-40°F - 65°C/149°F
-40°C/-40°F - 65°C/149°F
Power Cable Length:
48" #4 AWG (1) Red, (1) Black
48" #4 AWG (2) Red, (2) Black
48" #2 AWG (2) Red, (2) Black
Compatible with Cobra
Remote LCD (SKU CPIALCDG1)
Yes
Yes
Included
Dimensions
3.46"x8.35"x9.84"
3.74" x 8.94"x11.5"
4.72"x10.47"x13.07"
Net Weight
3.85 lbs
5.73 lbs
7.83 lbs

Cobra PRO Series Specifications

General

Input Voltage	12V DC
Output Voltage	120V AC
Output Waveform	Modified Sine Wave
Frequency	60 Hz
Model	PRO Series
Continuous Power	1500W
Peak Power	3000W
AC Outlets	2
Cooling	Fan
Protection Features	Overload, Short Circuit
Dimensions	Varies by model
Weight	Varies by model