Nothing Comes Close to a Cobra
®
7
Settings
Your Detector
Manual Mute
Your detector allows you to quickly turn Off an audio Alert by momentarily pressing
the Mute button. If you press the Mute button a second time during
the Alert, the audio Alert will be turned back On.
Auto Mute will automatically reduce the audio volume of all alerts after four seconds
for as long as the signal is detected. The factory setting for Auto Mute is On.
To Turn Auto Mute Off
Press and release
the Mute button
while no alert
is occurring.
Audible Tone Visual Display
One beep Audio Only
To Turn Auto Mute On
Press and release
the Mute button
again while no
alert is occurring.
Audible Tone Visual Display
Two beeps Audio Only
Mute Button
Press and
release
Anti-Falsing Circuitry
Your RAD 250 is designed to provide you the truest alerts and minimize the
distraction of erroneous signals from radar-based xed-position and moving sources.
• Adjustable Sensitivity: City / Highway modes allow driver to adjust sensitivity
to driving environment, reducing false alarms from xed position sources such as
automatic door openers.
• IVT Filter: system automatically reduces false alerts from moving
In-Vehicle Technology sources such as collision avoidance systems and adaptive
cruise control.
To Next Page
Loading...
Need help?
General
