English
10
Settings
Your Detector
Radar Alert Settings
The detector allows you to choose whether it will show alerts on the X, K and Ka
Bands. The factory settings are: X, K, and Ka On.
To Turn X Band On and Off
While no signal
is being detected,
press and hold
both the Dim and
Mute buttons for
four seconds.
Audible Tone Visual Display
X On = Two beeps X/K LED Flashes Twice
X Off = One beep X/K LED Flashes Once
To Turn K Band On and Off
While no signal
is being detected,
press and hold both
the Mute and SEN
buttons for
four seconds.
Audible Tone Visual Display
K On = Two beeps X/K LED Flashes Twice
K Off = One beep X/K LED Flashes Once
To Turn Ka Band On and Off
While no signal
is being detected,
press and hold
the Dim and SEN
buttons for
four seconds.
Audible Tone Visual Display
Ka On = Two beeps
Ka LED Flashes Twice
Ka Off = One beep Ka LED Flashes Once
To Next Page
Loading...
Need help?
General
