Remove grass and deposits from wheels, aerator cylinder and hosing.
A
djusting for wear:
F
The Aerator is subject to wear in use due to the
way in which it works . The more intensively the
Aerator is used , the greater the wear on the
knives.
Hard or very dry ground accelerates wear as
does excessive use of the Aerator
If the results of your
become increasingly worse due to knife wear,the
aerator cylinder can be adjusted twice.
Note: Wear adjustment is not used for height adjustment. Adjustment of the aerator
cylinder without visible wear can cause damage to the aerator cylinder or overload the
motor.
The aerator cylinder
adjustment positions. When you want to move
the aerator when not in use, you should rotate
the adjustment button ① to the “high” position.
Transport position:
Rotate the adjustment button ① t
o the
“high”position gently away from the housing and
move to the position required.
To Next Page
Loading...
