Cobra SA40E - Operation; Maintenance

C
D
13
D
4.Operation
Starting and Stopping:
E
5.Maintenance
Cleaning Aerator:
Make sure the blade has stopped
rotating before switching “on”
again.
-Do not rapidly switch on and off.
Starting:
① Press and hold the safety button
① Squeeze the switch lever ②
towards the handle (E)
② Release the safety button
Stopping:
Release the switch lever ②
Danger! The aerator cylinder can cause injuries!
Prior to maintenance unplug from the mains and wait until the Aerator drum has
stopped. Disconnect the mains power. Wear thick heavy-duty gloves for performing
maintenance.
The Aerator should be cleaned after each time it is used.
Risk of injury and physical damage !
Do not clean Aerator under running water (particularly under high pressure ).
Do not use hard or pointed objects for cleaning the Aerator.
E