Cobra SC200 User Manual

19 | P a g e
• Plug the Micro USB cord into a reliable power source such as your home’s outlet or your
vehicle’s CLA adapter. The Dash Cam will turn on and automatically boot into the Firmware
Update Menu.
• Follow the directions on the camera display to update firmware if the unit has one. Units
without displays will update automatically.
• You can check if your camera is up to date by checking the firmware in your camera’s ‘About’
setting submenu in the camera or via the app.

Cobra SC200 Specifications

General

Resolution	1080P Full HD
GPS	Yes
Wi-Fi	No
Parking Mode	Yes
G-Sensor	Yes
MicroSD Card Support	Up to 128GB
Loop Recording	Yes
Night Vision	Yes