Cobra SC400 User Manual

Lists key features of the SC400 dash cam, including channel capability, Wi-Fi, alerts, and GPS.

Provides contact information for product support and service, directing users to Cobra's website.

Lists the items included in the SC400D and SC400 dash cam packages.

Details the various ports and buttons on the dash cam unit for connectivity and control.

Instructions for attaching the dash cam mount to the windshield, emphasizing correct placement.

Explains how to connect the rear camera for dual-view recording and its placement.

Details how to connect the dash cam to the vehicle's power source using the included adapter.

Explains the basic operation after installation, including loop recording and emergency recording.

Explains how to turn the dash cam on and off, both automatically and manually.

Describes how the camera continuously records and how to protect clips from being overwritten.

Explains how emergency recordings are triggered by impact or button press and are saved.

Information about using and formatting the Micro SD card, including compatibility and recommendations.

How to adjust audio volume for notifications and announcements via settings or app.

Explains the voice prompts the camera provides for system information and alerts.

Recommends initial setup steps, including pairing with the Drive Smarter App for firmware.

Details connecting the dash cam to the Drive Smarter app for features like cloud management.

Step-by-step guide for connecting the dash cam to the Drive Smarter app.

How to receive real-time alerts about road hazards via the Drive Smarter App.

Instructions for setting up and integrating Alexa voice assistant with the dash cam.

How to invoke and control Alexa on the dash cam using voice commands or the button.

Describes the main display screen and its functions during operation.

Basic information about the video screen and button functions when recording or stopped.

Explains the meaning of icons displayed on the dash cam's status bar for quick reference.

Options for configuring video resolution, loop clip time, and other video parameters.

Setting the duration for individual video clips recorded by the dash cam.

How to view and manage recorded videos and photos stored on the Micro SD card.

Lists commands that can be used to control the dash cam by voice for hands-free operation.

Information on how the SD card stores recordings, distinguishing between loop and locked content.

Information about how photos are saved in the locked partition and managed separately.

Overview of built-in safety features like G-Sensor Impact Detection and Parking Mode.

How the G-Sensor detects impacts and automatically locks recordings.

Explains how the dash cam monitors the vehicle when parked for motion or impacts.

Covers various general configuration options for the dash cam, including video and system settings.

Allows selection of video resolution for loop and emergency recordings.

Enabling/disabling Wi-Fi connection and viewing the camera's network name and password.

Options to enable/disable GPS for location stamping on recordings.

Options to enable/disable Bluetooth for connectivity with the Drive Smarter App.

Settings for date, time, and time zone synchronization, with automatic and manual options.

Options to enable or disable the microphone for silent video recording.

Setting up motion detection for monitoring suspicious activity around the parked vehicle.

Enabling parking mode to monitor for G-Sensor impacts or motion when the vehicle is parked.

Setting time limits for Parking Mode or Motion Detection to prevent battery drain.

Adjusting the sensitivity of the G-Sensor for impact detection and recording locking.

Options to add data overlays like date, time, speed, and GPS to recorded videos.

Setting a custom driver ID for stamping on video footage as part of the watermark.

Allows adjustment of video brightness and darkness for optimal image capture.

Enabling or disabling audible feedback for button presses on the device.

Setting the display timeout duration after which the device's screen turns off.

Configuring the interior camera's infrared LEDs for clear recording in low-light conditions.

Selecting the on-screen display language for the camera unit's interface.

Selects videos for auto-upload and configuration of incident reports and Mayday alerts.

Setting units for speed displayed in watermarks, choosing between miles/hour or kilometers/hour.

Enabling Wide Dynamic Range for capturing better video quality in varying light conditions.

Choosing the format for GPS data that is stamped in video watermarks.

Setting operating frequency (50Hz/60Hz) to avoid video flickering.

Setting reminders to format the Micro SD card to maintain proper operation.

Reminders to free up locked video content to ensure space for new recordings.

Resets the device to factory settings without affecting the memory card.

Formats the inserted SD card, permanently deleting all data on it.

Displays device serial number, FCC ID, and firmware version.

Steps to update firmware wirelessly using the Drive Smarter mobile application.

Steps to update firmware by connecting the dash cam to a computer via USB.

Frequently asked questions covering mounting, SD card usage, power issues, and GPS.

Details the terms and conditions of the product's limited warranty.

Lists conditions that are not covered by the product warranty, such as misuse or modification.

Specifies limitations on Cobra's liability and disclaims other warranties.

Provides general guidelines for Cobra product warranties and accessory coverage.

Details the warranty period and Cobra's repair or replacement policy for the product.

Lists circumstances that void the product warranty, including serial number tampering or damage.

States disclaimers of warranties and limitations on consequential damages.

Outlines general warranty coverage for Cobra products and accessory item coverage.