Allows you to set a duration after which the device’s display turn off with the camera still
recording. This setting is useful to avoid distracted driving and having a bright LED screen when
driving at night.
Interior Night Vision:
The interior camera’s infrared LEDs allow for clear recording at night. You can set this to be
always on, off, or select Auto to allow the camera to detect low-light conditions and
automatically enable Interior Night Vision recording.
Language:
This setting allows you to pick the on-screen language for the camera unit.
Driver Assistance (ADAS):
ADAS features allow you to receive warnings when you are in danger of colliding with an object
in front of you (Forward Collision Warning), drifting out of your lane (Lane Departure Warning),
and Speeding beyond a limit you can pre-set for yourself (Speed Alert). You can toggle each of
these alerts on/off within this menu.
To use ADAS features, please ensure that the camera’s vision system is properly calibrated, and
that the dash camera is properly oriented relative to the road ahead.
To Calibrate:
Cursor over the “Calibration” item and press “OK” to select.
For a properly mounted dash camera,
• The vertical line would appear to divide the windshield into equal parts.
• The horizontal line would align with the front edge of your vehicle’s hood if your hood is
visible.
iRadar Network Alerts:
This setting allows the user to program real-time driver alerts acquired from the iRadar network.
Here you can choose to have the camera make a voice announcement when there is a red-light
camera or speed-camera ahead, or to simply display the warning on the LCD display. You can
also choose to turn notifications from the unit off completely and simply follow along using the
iRadar App.
Drive Smarter Services:
These settings allow you to select which videos you would like auto-uploaded to the Drive
Smarter App for sharing/review. You can also choose to have Incident Reports sent to your
insurance provider, as well as Mayday alerts sent to your Emergency Contact if a severe G-
Sensor event is detected.
Speed Units
Choose between miles/hour or kilometers/hour as the speed unit stamped in the watermark.
To Next Page
Loading...
Need help?
General
