2
OPERATION
Charging Your Headphones
Connect one end of the provided M
icro USB cable to the
Headphones
and t
he other to a power
source. While the
Headphones
ar
e
charging the LED indicator light will turn
red. When it’s fully charged the LED indicator will turn blue.
Powering On & Off
On: Press hold and release the “Power/Mode” button to turn
the headphones on. The LED indicator will begin flashing
blue and red indicating that the headphones have
successfully powered on.
Off: Press hold and release the “Power/Mode” button. The
user will hear a voice prompt say “Power Off” and then the
headphones will turn off.
Note: The Headphones will power off when not in use.
Connecting via Bluetooth®
After powering on the Headphones and seeing the LED
indicator begin alternating between blue and red. The user
LED INDICATORS
Powering Off
Powered On /
Bluetooth® Mode
Charging Finished
Blue
Flashes Blue and Red
LED Indicator Light Turns Off
Connected Status
LED Flashes Blue
LED Indicator Light Turns Blue
TF Mode
Charging In Progress
Red
To Next Page
Loading...
